歡迎您，浏覽北京友商科技有限公司官方網站！
服務熱線：+86-10-53821869 / +86-755-23480857
産品描述
The NCS8510 is a USB Type-C bi-directional linear redriver supporting data rates up to 10 Gbps. This multi_protocal linear redriver is capable of supporting USB type-C with USB 3.1 and DisplayPort 1.4 as alternate mode. It can also be configured to support custom USB Type-C alternate modes. The NCS8510 provides several levels of receive equalization to compensate for cable and board trace loss due to inter-symbol interference (ISI) when USB 3.1 Gen 1/Gen 2 or DisplayPort (or other Alt modes) signals travel across a PCB or cable. This device operates at a single 3.3V power supply and implements advanced power management by monitoring USB power states and snooping DP link training. All four lanes of the device are reversible and each lane has a receiver equalizer with selectable gain settings.
産品參數
• Reversible 4 lanes linear redriver supporting data rate up to 10Gbps
• Supports USB type-C with USB 3.1 Gen 1/Gen 2 and DP 1.4
• Linear equalization up to 10 dB at 4.05 GHz
• Supports both Pin strap and I2C programming for lane direction and equalization
• Configuration through GPIO or I2C with 3.3V/1.8V interface voltage levels
• Advanced power management by monitoring USB power states and snooping DP link training
• Hot-Plug capable
• Single 3.3V Supply
• Temperature range: -40ºC to 85ºC
• Package: WBQFN 40pin (6mm x 4mm)
相關産品
産品咨詢
北京總公司
北京市朝陽區望京綠地中心A座A區9層
深圳子公司
↵廣東省深圳市福田區深南大道6019号金潤大廈8層
西安分公司
西安市高新區錦業一路52号寶德雲谷國際B座2003
合肥子公司
↵合肥市高新區創新大道2800号創新産業園2期F棟705
電話：+86-551-63657380